Pricing
Drop in anytime, appointments not needed
Steam Clean of Drive train £20
Armour Insert Install from £30 per wheel +cost of insert
HEADSET SERVICE. £30
The headset will be removed, cleaned and inspected for damage and wear. The headtube of the frame and the steerer tube of the fork will also be cleaned and checked. The headset will be refitted and the cups and bearings will be greased. The headset will be adjusted accordingly.
HEADSET FITTING. £35
Includes frame preparation as needed. Grease will be applied to the bearings and the headset will be adjusted.
An expander plug or star nut will be fitted to the steerer tube.
FORK FITTING. £40
As above but with the additional work of cutting down the steerer tube.
BOTTOM BRACKET SERVICE. £35
The bottom bracket will be removed and cleaned and the frame threads or bearing surfaces will be cleaned and greased. Open cup and ball bottom brackets will have new ball bearings fitted.
BOTTOM BRACKET FITTING. £30
Includes cleaning the frame threads or bottom bracket shell if press fit. Shell will be faced/rethreaded if necessary +£`15. Bearings will be greased and the bottom bracket will be adjusted if applicable.
HUB SERVICE. Front £25, Rear £30
The hub will be dismantled and cleaned along with the cone nuts and axle. Bearings will be cleaned or replaced. The hub will be reassembled with fresh grease.
HUB GEAR SERVICE. From £45
We are happy to strip them apart and service them. Price is
from £45 and we quote them as we see them as each service differs.
BRAKE SERVICE. £25
Both brakes will be balanced and tightened. Braking surfaces on the rims will be cleaned and degreased, and brake pads will be checked and replaced if needed. Cabling will be lubricated as needed or replaced.
BRAKE PAD FITTING. Each brake £10
The fitting of new brake pads. Unlike a brake service, the labour doesn’t include fitting or lubricating cables, or the cleaning of the rims or rotors, nor does it include excessive adjustment.
DISC BRAKE SERVICE (WITH BLEED IF NEEDED) Each £25
Each brake will be centered and adjusted. The rotors will be cleaned and degreased, and brake pads will be checked and replaced or cleaned as needed. Cabling will be lubricated as needed or replaced.
GEAR SERVICE. £30
Gears will be tuned and indexed where applicable. Derailleur systems will have limit screws set, and the alignment of the rear mech hanger will be checked. Cables will be replaced as needed at cost.
GEAR SERVICE WITH DRIVECHAIN DEGREASE. £40
In addition to a gear service, the drivechain will be removed and put through our parts washer to get it super clean. The gears will then be serviced as per a gear service. Allow a budget for an inner cable or two.
WHEEL BUILDING. From £45 +spokes
Wheel building prices vary depending on the type of wheel and the spokes used. As a general rule, new spokes and a fresh rim should be used for a wheel build, although a hub can be built onto many rims. We use Sapim and DT Swiss spokes etc and can supply plain, double butted, straight pull and bladed spokes.
WHEEL TRUING. £15
When truing a wheel we always aim to get within 3mm. Truing a wheel will often include tensioning the spokes.
WHEEL TRUING WITH SPOKE REPLACEMENT. From £20
As above but including the replacement of broken spokes. Excludes the cost of the spokes. £10 premium for tubeless wheels which in addition sometimes need new tubeless tape fitting.
WHEEL FITTING. From £5
Wheels will be fitted along with rim tape, tyre and tube. Brakes will be checked, and gears if it is a rear. Tyres will be inflated.
TYRE FITTING. Each from £10
Tyres will be fitted taking note of the rotation direction if applicable, and inflated to the recommended pressure.
TUBELESS TYRE FITTING. Each £15
Tubeless rim tape and sealant installed as needed and charged for accordingly. Tyres checked and inflated.
PUNCTURE REPAIR.
Done while you wait only, (we can’t store bikes for small jobs due to a lack of space). The prices INCLUDES the cost of a replacement standard inner tube.
A wheel on it’s own £15
‘Standard’ bike including Bromptons £15
Ebikes, Scooters Dutch bikes and cargo bikes from £25
Bike builds from £35 you will need to dispose of your cardboard boxes/waste
Guidelines
For in store repairs
FITTING PARTS BOUGHT ONLINE.
Of course, no problem. But please note… We spend hundreds, sometimes thousands of pounds every week on stock for the shop. We sell at manufacturers RRP. Buying online is cheaper for anything in the world of retail. But the RRP allows us as a small shop to make a margin, pay our bills and the staff, and exist as a small independent business. We are not a fitting service for the internet so expect to pay a small premium if you rock up for a service then hand over a delivery of parts bought online.
Prices quoted are guidelines and additional labour maybe required depending on the condition of the bike.
Any bike not collected within 5 working days of completion will incur storage charges of £3 per day.
Any bike not collected after 30 days will be sold to to recover our costs.
We reserve the right not to work on any economical bike or we when can not source parts. blocks..